Pet Animal Cremation

 We finish this project in year 2010 to 2011 and delivery to Hochiminh port, Vietnam with 1×40’feet open top full container. Items/Model YD-500 Burning Rate (kgs/Hour) 500 kgs/Hr. […]

Length of the refractory cellular lining: 0.11 KW0 Follower power 0.37 kW * Insulation: ? Allow limited gas ingestion The incinerator with pyrolytic combustion have to have: a. […]

Coronavirus Disease 2019 (COVID-19) pandemic continues all over the world, clinics,hospitals,goverment may need to consider on-site disposal for the infectious  medical waste. The medical waste incinerators that has […]

Employed and/or Infected oil: Taken advantage of electric motor oils and/or mineral oils unfit for their originally meant use. Primarily electrical motor Waste lead-acid batteries, rained/un-drained, in addition […]

Please confirm your settlement to carry out this contract job by sending handout and also your rate quotation for the recorded below specification allowing us submit it to […]

50 bed hospital proposal model TS5 or TS10 incinerator 200 bed hospital proposal model TS50 incinerator we have more than 1000kgs per hour capacity incinerator. How does a […]

Item Specification Model A1500 Internal Dimensions 150 x 100 x 96cm Suit for Animal Cat – yes Dog – yes Pig – yes Cow – small Main Product List Primary […]

Mmedical waste burner with the capacity of getting rid of as much as 0.25 cubic meter of pathological or infectious waste. incinerator providers.7) Burn price: 15 – – […]

Prerequisites of Burner 1. Must have groundwork, Incineration, Scrubber measures to melt waste entirely and waste gas have to be non-polluted 2. Strong steel, heat resistant coating, stainless […]

13.     Civil    works，    installation    and Comnuss!Onmg    lndusive  of  civil  works  (brick  wall  incinerator  house Type of waste for disposal    Animal  body  parts，other  biomedical  waste，organs dung， bedding materials，plant […]

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.We supply single combustion chamber, […]

The sludge shall be properly atomized by means of compressed air in the burner in order to ensure complete combustion of the sludge. Both compressor and receiver shall […]

include automatic stop/start programmed timer control, flame failure gear and ignition failure gear to close off the fuel supply in case of malfunction. The burners shall be mounted […]

Incinerator Parts Mineral Insulated Thermo couple sensor K-Type 300SS K type 300SS: M27*2, 300mm Ins,2520 S.S, 2.5mm core  HICLOVER – Medical Environmental    WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator […]

Medical incinerator with a 10 kg/hour (15 lbs/hour) capacity shall be constructed on the site, complete with Stacks, control panels and all accessories, complying with 01015 par. 5.16.2 […]

Incinerate: medical waste and general waste Capability to burn waste: ·         Use: For medications ·         With Chassis to be Mounted in truck/lorry ·         May have a primary and […]

50 kg/  hour  capacity incinerators ·        Burning Rate: 50kos/hr ·        Feed Capacity:  150kqs ·        Main Combustion  Chamber:  900 Dimensions ·        Secondary  Combustion  Chamber:  300 Dimensions ·        Mix Combustion  […]

Basic Info. Model NO.:medical waste incinerators on sales Export Markets:Global Product Description Technology Respond(FAQ)  Q: What is kind of waste can utilize in this equipment?  A: This gear […]

Product Description Key Features:  * All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long life. *according to sequence * High fever, long life of incinerator.  * […]

We finish this project in year 2010 to 2011 and also distribution to Hochiminh port, Vietnam with 1×× 40′ feet open leading full container. Door Opening (cm) 500 […]

High Temperature Waste Incinerator Model D. MB 750XL Burn Rate-150Kg/hour minimum Weight(Kg)-4000kg Secondary Chamber (double chamber with post-burning) Gas Retention Time 2 second Fuel Diesel Power Supply for […]

Basic Info. Model NO.:double-chamber pyrolytic incinerators Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd.  Nanjing Clover Medical Technology Co., Ltd.. […]

Waste Burner Design TS150 PLC, Review Construction is dual/double combustion chamber with 02 sets oil burner, batch load  incineration equipment. Waste feed chamber is 1570Liters (1.57m3, TS150 PLC).  […]

Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can […]

Incinerator 20 Kg Incinerator electrically operated including:  A cage for receipt of biomedical waste;  A combustion room with fireplace using a filter to retain ashes;  […]

CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND NON HAZARDOUS WASTES (BOTH DOMESTIC in Addition to INDUSTRIAL) AT A MINIMUM PRICE OF 300KG/HR WITH THE COMPLYING WITH REQUIREMENTS: Ø PRIMARY […]

The first is a little Shall provide ladder till the top. It shall be operated by manual and automatic mode. Combustion Fan: Material of construction of outer body: Mild Steel refractory lined from interior. Second is a 500kg per/hr incinerator for a company planning to begin a I.D. Fan: It shall have separate digital display of temperature for both chambers. C.E.= __%CO2______ x 100 Material of Construction: Mild Steel, 5mm thick Bidder shall submit detail drawings, design, and layout plan of civil functions. […]

Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Incinerator is a incineration equipment, direct fire waste by gas fuel or oi […]

Items/Model TS50(PLC) Picture Principle Medical Waste Incineration,dual chamber incinerator Burn Rate 50-100 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 560L Internal Dimensions 100x80x70cm Secondary Chamber 280L Smoke […]

The following are excerpts from the Environmental Protection Act 1.     prescribe that, where discharged to the environment, (a)    endangers the health, safety or welfare of persons, (b)   […]

Basic Info. Model NO.:pet cremation incinerator cost Export Markets:Global Product Description A Model animal crematory burning rate from 20-400kgs per hour. Heavy duty combustion chamber and match for […]

MAINTENANCE CONTAINER BE FINISHED WITH RESTRICTED TRAINING – COMPLIES WITH EURO/ OR US-EPA DISCHARGE REQUIREMENTS – CAPABILITY TO MELT SQUANDERED LUBRICANTS (POL) – HANDLE ORGANIC SOLIDS (TO CONSIST […]

Basic Info. Model NO.:animal by-products of the incineration plant sche Export Markets:Global Product Description Key Features:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long […]

Items/Model TS30(PLC) Picture   Burn Rate Average 30 kg/hour Feed Capacity Average 60kg per feeding Control Mode PLC(Programmable Logic Controller Incinerator) Car Control and Display Combustion Chamber 330L […]

Basic Info. Model NO.:capacity of burner for medical incinerator Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Key Features:  * All versions with Dual combustion chamber.  […]

Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Company License No.,: 320105000138343  Taxation Certificate No.: 320105571573734  Export Business Certificate No.: 3201571573734  Nanjing Clover Medical Technology Co., Ltd.. […]

Basic Info. Model NO.:dioxine emission control medical hospital inciner Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd.. Items Specification YD Model YD-30 / YD-50 / YD-100 […]

Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Program Scope:  1. Hospital& practice: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. 3. Community & Sea Port & […]

Items/Model TS300(PLC) Principle Waste Incineration Treatment Burn Rate Average 250 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 2000L Internal Dimensions 170x120x100cm Secondary Chamber 1000L Smoke Filter […]

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We provide single combustion […]

Dual heat burners and dual chamber incinerator Burning capacity up to 30 Kg per hour Main Product List Primary Combustion Chamber(Main body stainless steel) Secondary Combustion Chamber(Main body […]

HICLOVER is growing brand for environmental protection field, and market share with the majority of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. […]

Items/Model TS500(PLC) Picture   Principle Waste Incineration Treatment Burn Rate Average 500 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 2700Liters (2.7m3) Internal Dimensions 190x120x120cm Secondary Chamber 1300Liters […]

Pre-assembled, containerized type Incinerator Model CA100 Picture Waste Treatment Medical Waste Incineration Treatment Feed Capacity Average 100-200 kgs per feed Burning Rate Average 100-120 kgs per hour Burning […]

Large Capacity Animal Pet Cremation HICLOVER Model A1500 with E-Power Auto. Door Model A1500 Internal Dimensions 150 x 100 x 96cm Suit for Animal Cat – yes Dog […]

medical waste diesel incinerator Burning Rate:47.5–50kg/hour 3) Compliance with applicable Haitian standards and regulations. Operational characteristics Refractory Casting:Minimum 65mm 7) Mounted on a secure foundation, as per example […]