incinerator manufacturer

“PYROLYTIC” combustion, by controlling the gasification of waste

The incinerator manufacturer must prevent the discharge of black smoke and fine dust, during the loadings.

It shall have the ability to reduce the quantity of wastes by 98%.

It shall have the ability to hold emission in the second burn with gas residence of not less than two seconds.

 

The incineration should be wholly free from visible smoke in addition to offensive odours.

1.0the main ignition burner shall providing ignition of the waste to 850 °C and must switch off to conserve fuel.

the principal combustion chamber shall be constructed from heavy steel plate and the unit is internally lined with a

full layer of hote face refractory and higher efficiency insulation.

The Internal diameter of the Chimney at least: ? 400 and its height: 8 m